New Yamaha F300NCA Counter Rotation 25" Manufactured 03/2017

Description

This is a NEW 4 STROKE Yamaha 300
horsepower outboard. Manufactured
03/2017
. This Motor is for boats with a 25" transom. This engine comes with a 3 YEAR Yamaha WARRANTY. MSRP 211.00
STOCK # 6CEN-1040207
This outboard must be delivered to a business destination that is equipped with a loading dock or fork truck for unloading. Residential delivery is available at an additional cost of 0.00.
Engine Type
V6
Displacement
4.2L
Bore x Stroke
96 x 96mm (3.78 x 3.78 in)
Prop Shaft Horsepower
300hp at 5500 rpm
Full Throttle RPM Range
5000 ~ 6000 rpm
Alternator Output at W.O.T.
50 - 70 Amp
Compression Ratio
10.3:1
Fuel Induction System
EFI
Weight †
250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)
Recommended Fuel
Octane 89
Recommended Engine Oil
Yamalube
®
4M (See owner's manual)
Recommended Fuel Filtration
Yamaha 10-Micron Fuel / Water Separating Filter (external)
C.A.R.B. Rating
3-Star
Exhaust
Through Propeller
Intake
24
Ignition
TCI Microcomputer
Spark Plug
LFR6A-11
Alternator Output
50 - 70 Amp
Starting System
Electric
Lubrication
Wet Sump
Engine Oil Capacity
6.3L/6.0L
Recommended Cooling
Thermostatic Control
Ethanol Blend Limit
10% Maximum
Gear Ratio
1.75:1
Gear Shift
Forward, Neutral, Reverse
Shaft Length
25" - 30" - 35" (F300 DEC Only)
Degree of Tilt
Mechanical 67°, Digital Electric Steering 69°, Bolt-on steering 70°
Degree of Trim
-3° through +16°
Dry Weight with built-in DES
25" shaft 277 kg (611 lbs), 30" shaft 283 kg (624 lbs), 35" shaft 288 kg (635 lbs)
Dry Weight without built-in DES
25" shaft 255 kg (562 lbs), 30" shaft 261 kg (575 lbs), 35" shaft 265 kg (588 lbs)
Dry Weight with Mechanical Controls
25" shaft 255 kg (562 lbs)
Mounting Centers
28.5"
Steering
Integrated, Electric Actuation
Steering Angle (maximum)
32° from center, either direction
Warranty
Limited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
An authorized dealership can set up a warranty on new motor. The "pre-delivery" inspection is not covered in the price of the motor or under warranty. Inspections usually take one to two hours depending. This service can be provided to you through our service department if you wish. It can be done by any Yamaha Marine certified technician; it is not and cannot be done prior to shipping. PDI can only be done once the motor is installed on the boat.
Flat rate shipping is to US addresses (excluding Alaska and Hawaii) and this is either business to business with loading dock or forklift, or pick up at the freight carrier terminal. Residential delivery quote is available (add a minimum of 0)
Outboard Motors cannot be shipped outside the United States
On Oct-14-16 at 13:21:21 PDT, seller added the following information: