Engine Motor & Trans Mount 6PCS 2009-2016 For GMC Acadia 3.6L For Auto Trans

Description

Item Condition: New  High Quality Rubber  Built to O.E. Specifications  Prevents Damage To Vehicle Components
Product Information: Engine Motor & Trans Mount Set
1 x EMT3209 / A5549HY / 3209 / EM-4037 - Front Motor Mount - Hydraulic with vacuum pin!
1 x EMT3208 / A5548HY / 3208 / EM-4035 - Rear Motor Mount - Hydraulic!
1 x EMT3191 / A5458HY / 3191 / EM-4036 - Transmission Mount - Hydraulic!
1 x EMT3141 / A5444 / 3141 / EM-3141 - Rear Torque Strut Mount
2009-2017 Buixck Enclave 3.6L for Auto Trans.
2009-2017 Chevrolet Traverse 3.6L for Auto Trans.
2009-2016 GMC Acadia 3.6L for Auto Trans.
Engine Motor & Trans Mount 6PCS 2009-2016 For GMC Acadia 3.6L For Auto Trans
Item Condition: New
High Quality Rubber
Built to O.E. Specifications
Prevents Damage To Vehicle Components
Product Information: Engine Motor & Trans Mount Set
1 x EMT3209 / A5549HY / 3209 / EM-4037 - Front Motor Mount - Hydraulic with vacuum pin!
1 x EMT3208 / A5548HY / 3208 / EM-4035 - Rear Motor Mount - Hydraulic!
1 x EMT3191 / A5458HY / 3191 / EM-4036 - Transmission Mount - Hydraulic!
1 x EMT3141 / A5444 / 3141 / EM-3141 - Rear Torque Strut Mount
2009-2017 Buixck Enclave 3.6L for Auto Trans.
2009-2017 Chevrolet Traverse 3.6L for Auto Trans.
2009-2016 GMC Acadia 3.6L for Auto Trans.
2017-2017 GMC Acadia Limited 3.6L for Auto Trans.
2009-2010 Saturn Outlook 3.6L for Auto Trans.
Here Are Some Of The Benefits Of Using Good Quality, Rubber Engine Mounts:
1.Reduce excess vibration and noise
2.Keep engines from sustaining damage
3.Extend the lifespan of the engine and connected sensor components
4.Keep transmission and other vital parts from sustaining damage
5.Engine mounts are designed to absorb the energy of the system and become worn out after a while and may require a replacement. It’s important not to wait to replace your engine mount or your vehicle may be damaged.
Engine Mount Form
Engine mounts can be of various designs or form depending on the application and amount of energy they need to absorb.  Because of this, most engine mounts are relatively small or just large enough dampen and absorb the energy without taking up too much space. There are a few parts that go into an engine mount. One of these is the molded rubber bushing or mount which acts as the vibration control and cushion. The engine will typically be attached directly to this part. There will also be a bolt that goes through the length of the motor mount, which is used to secure it.  The purpose is to make sure there is a rubber break between the two mating surfaces. Some motor mounts have a metal cover over the rubber part to provide more stability.
Engine mounts are made in a variety of shapes. They can be large, with multiple mounts connected to a frame. Some are also made with hydraulic fluid on the inside to provide more damping and flexibility. The shape, size and materials of an engine mount depends on how much load is applied to the mount and how much energy the mount needs to absorb or dampen from transmitting to the support frame.
Rubber Engine Mounts
Here are some reasons why you should choose rubber for your engine mount:
1.Versatile in the shapes and configurations to adapt to many different applications.
2.Excellent vibration and noise dampening
3.Long lifespan - correctly selected, a rubber isolator can outlast the engine it is protecting.
4.Provides a balance between energy absorption and stability for the engine - these are often in conflict.
5.Resistant to ozone, water, oil and other damaging fluids/elements - giving them the ability to perform under tough conditions at low cost.
6.Natural rubber is the most widely used and common as it is the best material for resiliency or the ability to go back to its original shape. The ability to return to its original shape and not to stay deformed (compression set) is an important characteristic.
Causes of Worn Engine Mounts
There are many reasons why your engine mounts may need replacing, some of the most common include:
1.Incorrect installation of the mounts
While you can install your engine mounts yourself, we recommend taking your vehicle to a reputable and qualified engineer as soon as you notice any signs your engine mounts need replacing. This ensures that your new fittings will be installed properly and last longer.
2. Ageing and weathering overtime
A common cause of engine mount failure is age and wear. Engine mounts are typically made of rubber, a material that is prone to wear over time and may lose its elasticity and, as a result, lessen its function to your engine. Age and stress can cause small cracks in fluid-filled engine mounts that can lead to leaks. As soon as you notice this has happened, made obvious by increased vibration and engine mount noise, you should replace your worn engine mount.
3. Driving techniques that can damage the vehicle’s parts
Over-revving the gears and improper use of the clutch can cause serious damage to your engine mounts. Practising proper driving techniques will extend the lifespan of your engine mounts and other vehicle components.
4. Accident involvement which has caused damage or moved the mounts
If you’ve been involved in an accident, you should always check for internal damage, such as engine mount failure, as well as superficial damage. Similarly, make sure you’re aware of a car’s road history before buying a new car and getting the right checks put in place before taking the vehicle to the road. Taking these precautions will help keep the machine operator safe.
5. Fluid leaks onto the mounts
If you notice any leaks in your motor, you should take your car for a service to fix the leak, and any other damage caused, no matter what the substance. For example, engine oil could cause the rubber to soften, leading to engine mount failure.
What Happens if I Don’t Change my Motor Mounts?
No matter the quality of your engine mounts, they all begin to wear down after usage and eventually require replacement. Not replacing an engine mount that is past its prime can lead to the following:
1.Road risk
If an engine mount breaks off from an engine, there will no longer be effective support. Damaged components can create a safety hazard for yourself and other motorists if other components break or fly off due to engine mount wear.
2. Damage to the engine
Engine movement or misalignment may occur as a result of engine mount failure. Broken or worn engine mounts may cause the engine to slide around in all directions in the engine bay, something that is particularly noticeable when accelerating or driving at high speeds.
3. Damage caused to other components
The vibration generated from worn engine mounts can have a noticeable impact on other vehicle components, such as fan belts or radiator hoses, leading to stretching or snapping. So, replacing worn engine mounts is vital to the overall health of your machine.
Item Specifics
Brand
X-engineclub
Manufacturer Part Number
X164447EX
Package Length
16.93 inch
Package Width
14.45 inch
Package Height
7.68 inch
Package Weight
14.47 LB
Package Size
16.93*14.45*7.68 inch
Interchange Part Number
A5548HY A5549HY A5458HY A5444
Cross Part Number
3209 3208 3191 3141 EM-4037 EM-4035 EM-4036 EM-3141
Placement on Vehicle
Front
Reference Part Number
90498423, 25840450, 25840458, 7201-1222, 7201-1248, 7201-1523
Other Part Number
3208 3141 3191 3209
Superseded Part Number
A5549HY A5548HY A5444 A5458HY 3209 3208 3141 3191
Fitment Type
Direct Replacement
Material
Rubber
Surface Finish
Completed
Warranty
1 Year
Custom Bundle
No
Modified Item
NO
Mileage
30000 miles
Transmission Type
Automatic Trans
Other Part Number 2
1J0 199 851R 1J0 1999 55AJ,1J0199262CL
Packaged
2 Motor Mounts & 1 Transmission Mount
Transmission Type
Automatic & Manual Trans
Fitment
For 1999-2005 Volkswagen Beetle 1.8L
Capacity
1.8L /2.0L
Application
For 1998-2001 Volkswagen Beetle 1.9L
Fit
For 1998-2005 Volkswagen Beetle 2.0L
Fit 2
For 1999-2005 Volkswagen Jetta 2.0L
Fit 3
For 1999-2006 Volkswagen Golf 1.8L
Fit 4
For 1999-2006 Volkswagen Golf 2.0L
Fit 5
For 2000-2005 Volkswagen Jetta 1.8L
Payment
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
Shipping
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
Contact Us
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Shop Category
Store Home
Starter
Alternator
Oil Pan
Harmonic Balancer
Throttle Body
Turbocharger
Engine Mount
Mass Air Flow Sensor
regulator rectifier
relay solenoid
stator
Crankshaft Position Sensor
camshaft Position Sensor
Throttle Position Sensor
Oil Pressure Sensor
MAP Sensor
car Carburetor
Height Level Sensor
Temperature Sensor
Driveshaft
Catalytic Converter
Sensor-8
Steering Rack
Ignition Coil
fuel pump
Automatic Transmission Filter
Transmission Shift kit
LED Brake Light
External Lights
Instrument Lights
License Plate Light
Car Interior Light
Cab Marker Light
Other
Hot Item
4 Ignition Coil Pack for Hyundai Elantra Tucson Kia Forte Soul 2.0L 1.8L UF651
USD 34.59
For Chevrolet Trailblazer GMC Envoy 4.2L 2003 2004 2005 2006 2007 Throttle Body
USD 67.99
4 UF247 Ignition Coil Pack for Toyota Corolla Celica Matrix Chevy Pontiac 1.8L
USD 49.29
4 Ignition Coil Pack for Buick Regal Verano Chevy Cobalt Equinox L4 2.4L UF491
USD 50.99
6 Ignition Coil Pack for Dodge Magnum Charger Chrysler Sebring 300 V6 2.7L UF502
USD 57.29
New List Item
Starter for Subaru Forester 2.5L 98-02 Impreza 2.2L 97-01 2.5L 98-03 23300-AA390
USD 56.93
New Starter For Honda Accord Element 03-06 2.4L 06312-RAA-505 M0T20371 SMT0288
USD 61.61
Alternator for 13735 Chrysler Neon 2000-2004 & Plymouth 1998-2001 A2TB2791 12V
USD 89.11
Alternator for IR/IF Ford F-150 1999-2004 4.2L/Rancer 1996-2001 4.0L 334-2253
USD 82.88
Alternator for IR/IF Isuzu Hombre/Oldsmobile Bravada 1998 1999 2000 10464433
USD 84.44
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
default
10
Engine Motor & Trans Mount 6PCS 2009-2016 For GMC Acadia 3.6L For Auto Trans
Item Condition: New
High Quality Rubber
Built to O.E. Specifications
Prevents Damage To Vehicle Components
Product Information: Engine Motor & Trans Mount Set
1 x EMT3209 / A5549HY / 3209 / EM-4037 - Front Motor Mount - Hydraulic with vacuum pin!
1 x EMT3208 / A5548HY / 3208 / EM-4035 - Rear Motor Mount - Hydraulic!
1 x EMT3191 / A5458HY / 3191 / EM-4036 - Transmission Mount - Hydraulic!
1 x EMT3141 / A5444 / 3141 / EM-3141 - Rear Torque Strut Mount
2009-2017 Buixck Enclave 3.6L for Auto Trans.
2009-2017 Chevrolet Traverse 3.6L for Auto Trans.
2009-2016 GMC Acadia 3.6L for Auto Trans.
2017-2017 GMC Acadia Limited 3.6L for Auto Trans.
2009-2010 Saturn Outlook 3.6L for Auto Trans.
Here Are Some Of The Benefits Of Using Good Quality, Rubber Engine Mounts:
1.Reduce excess vibration and noise
2.Keep engines from sustaining damage
3.Extend the lifespan of the engine and connected sensor components
4.Keep transmission and other vital parts from sustaining damage
5.Engine mounts are designed to absorb the energy of the system and become worn out after a while and may require a replacement. It’s important not to wait to replace your engine mount or your vehicle may be damaged.
Engine Mount Form
Engine mounts can be of various designs or form depending on the application and amount of energy they need to absorb.  Because of this, most engine mounts are relatively small or just large enough dampen and absorb the energy without taking up too much space. There are a few parts that go into an engine mount. One of these is the molded rubber bushing or mount which acts as the vibration control and cushion. The engine will typically be attached directly to this part. There will also be a bolt that goes through the length of the motor mount, which is used to secure it.  The purpose is to make sure there is a rubber break between the two mating surfaces. Some motor mounts have a metal cover over the rubber part to provide more stability.
Engine mounts are made in a variety of shapes. They can be large, with multiple mounts connected to a frame. Some are also made with hydraulic fluid on the inside to provide more damping and flexibility. The shape, size and materials of an engine mount depends on how much load is applied to the mount and how much energy the mount needs to absorb or dampen from transmitting to the support frame.
Rubber Engine Mounts
Here are some reasons why you should choose rubber for your engine mount:
1.Versatile in the shapes and configurations to adapt to many different applications.
2.Excellent vibration and noise dampening
3.Long lifespan - correctly selected, a rubber isolator can outlast the engine it is protecting.
4.Provides a balance between energy absorption and stability for the engine - these are often in conflict.
5.Resistant to ozone, water, oil and other damaging fluids/elements - giving them the ability to perform under tough conditions at low cost.
6.Natural rubber is the most widely used and common as it is the best material for resiliency or the ability to go back to its original shape. The ability to return to its original shape and not to stay deformed (compression set) is an important characteristic.
Causes of Worn Engine Mounts
There are many reasons why your engine mounts may need replacing, some of the most common include:
1.Incorrect installation of the mounts
While you can install your engine mounts yourself, we recommend taking your vehicle to a reputable and qualified engineer as soon as you notice any signs your engine mounts need replacing. This ensures that your new fittings will be installed properly and last longer.
2. Ageing and weathering overtime
A common cause of engine mount failure is age and wear. Engine mounts are typically made of rubber, a material that is prone to wear over time and may lose its elasticity and, as a result, lessen its function to your engine. Age and stress can cause small cracks in fluid-filled engine mounts that can lead to leaks. As soon as you notice this has happened, made obvious by increased vibration and engine mount noise, you should replace your worn engine mount.
3. Driving techniques that can damage the vehicle’s parts
Over-revving the gears and improper use of the clutch can cause serious damage to your engine mounts. Practising proper driving techniques will extend the lifespan of your engine mounts and other vehicle components.
4. Accident involvement which has caused damage or moved the mounts
If you’ve been involved in an accident, you should always check for internal damage, such as engine mount failure, as well as superficial damage. Similarly, make sure you’re aware of a car’s road history before buying a new car and getting the right checks put in place before taking the vehicle to the road. Taking these precautions will help keep the machine operator safe.
5. Fluid leaks onto the mounts
If you notice any leaks in your motor, you should take your car for a service to fix the leak, and any other damage caused, no matter what the substance. For example, engine oil could cause the rubber to soften, leading to engine mount failure.
What Happens if I Don’t Change my Motor Mounts?
No matter the quality of your engine mounts, they all begin to wear down after usage and eventually require replacement. Not replacing an engine mount that is past its prime can lead to the following:
1.Road risk
If an engine mount breaks off from an engine, there will no longer be effective support. Damaged components can create a safety hazard for yourself and other motorists if other components break or fly off due to engine mount wear.
2. Damage to the engine
Engine movement or misalignment may occur as a result of engine mount failure. Broken or worn engine mounts may cause the engine to slide around in all directions in the engine bay, something that is particularly noticeable when accelerating or driving at high speeds.
3. Damage caused to other components
The vibration generated from worn engine mounts can have a noticeable impact on other vehicle components, such as fan belts or radiator hoses, leading to stretching or snapping. So, replacing worn engine mounts is vital to the overall health of your machine.
Item Specifics
Brand
X-engineclub
Manufacturer Part Number
X164447EX
Package Length
16.93 inch
Package Width
14.45 inch
Package Height
7.68 inch
Package Weight
14.47 LB
Package Size
16.93*14.45*7.68 inch
Interchange Part Number
A5548HY A5549HY A5458HY A5444
Cross Part Number
3209 3208 3191 3141 EM-4037 EM-4035 EM-4036 EM-3141
Placement on Vehicle
Front
Reference Part Number
90498423, 25840450, 25840458, 7201-1222, 7201-1248, 7201-1523
Other Part Number
3208 3141 3191 3209
Superseded Part Number
A5549HY A5548HY A5444 A5458HY 3209 3208 3141 3191
Fitment Type
Direct Replacement
Material
Rubber
Surface Finish
Completed
Warranty
1 Year
Custom Bundle
No
Modified Item
NO
Mileage
30000 miles
Transmission Type
Automatic Trans
Other Part Number 2
1J0 199 851R 1J0 1999 55AJ,1J0199262CL
Packaged
2 Motor Mounts & 1 Transmission Mount
Transmission Type
Automatic & Manual Trans
Fitment
For 1999-2005 Volkswagen Beetle 1.8L
Capacity
1.8L /2.0L
Application
For 1998-2001 Volkswagen Beetle 1.9L
Fit
For 1998-2005 Volkswagen Beetle 2.0L
Fit 2
For 1999-2005 Volkswagen Jetta 2.0L
Fit 3
For 1999-2006 Volkswagen Golf 1.8L
Fit 4
For 1999-2006 Volkswagen Golf 2.0L
Fit 5
For 2000-2005 Volkswagen Jetta 1.8L
Payment
Shipping
Returns
Contact Us
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
All rights reserved.