2 Stroke 4 HP 63CC Outboard Motor Boat Motor Boat Engine With Air Cooling System

Description

2 Stroke 4 HP 63CC Outboard Motor Boat Motor Boat Engine With Air Cooling System
Description
Technical Data :
Engine type:    Single cylinder
Stroke:  2 stroke
Cooling System :  air-cooled
Engine model:    1E48F
Displacement :    63cc
Max. Power:    1.2.3kw/8000rpm
Start system:    Recoil start(manual start)
Ignition system:    CDI
Mixing ratio(Gasoline:oil)    25:1
Gasoline tank capacity:    1.2L
Idle speed:    3000rpm
Gear ratio:    2.08(27/13)
Propeller diameter:    18cm
Propeller options:    7-1/4*5-A inch
Running speed:    15--18km/h
Starting Procedure:
1. Lower engine to running position and check the following
• Fuel level
• Engine mount secure
• Propeller clear
2. Loosen air-vent screw on fuel tank cap by 2 or 3 turns (if fitted)
3. Firmly connect fuel hose to both fuel tank and engine
4. Squeeze primer bulb until it becomes firm
5. Make sure throttle grip on handle in START position
6. Clip lock plate onto emergency-stop switch and tie lanyard to your wrist
7. Pull out choke if starting cold engine
8. Start motor by pulling starter handle (manual start)
9. Push choke back in
10. Check fuel pump to ensure membrane is not torn out
11. Check carburetor to ensure that draining screw is not opened
Mounting An Outboard Motor:
The method of securing an outboard motor to the vessel.
Use of hand-tightened screw thread clamps. These clamp the transom of the vessel between the engine mounting bracket and the screw thread plates. Their tightness should be checked each time the engine is used. A safety rope or chain should also be used to secure the motor to the vessel and prevent the motor from dropping from the boat if the clamps get loose during vessel operation. On larger outboard motors, the mounting bracket is usually bolted through the transom plate. This is a more secure method, but regular checks must be made for looseness.
Trim Angle:
By changing the outboard motor’s drive angle, the    vessel’s bow can be made to rise or fall. The performance and stability of a vessel depends a great deal on correctly trimming the outboard. The correct trim angle depends on the vessel ’ s handling characteristics, the size of the outboard, the sea and loading conditions. Care must therefore be taken to ensure the outboard is trimmed correctly under different sea and loading conditions. On smaller outboards, the trim angle is adjusted manually by moving an adjusting rod to different holes in the mounting bracket. The bigger outboards usually have a Trim Switch fitted on the remote control level.
Instructions On Refueling:
The gasoline is highly flammable and explosive:
1.Don’t smoke,when refueling,keep away from fire, flame and ignitions of other sources.
2.Shut off the engine of your outboard engine before refueling.
3.Use unleaded gasoline only. Use 2 stroke engine oil.
4.The mixing ratio of gasoline and oil is 25:1. Mix the gasoline and oil and shake well.
5.Don’t spill the gasoline.Use clean cloth wipe off the spilled gasoline.
6.When start the engine, keep at least 3 meters distance from the refueling point.
Notice:
For this 2 stroke outboard motor, you need to use gasoline and oil mixed fuel, the gasoline and oil mixing ratio is 25:1.
Please use 93# gasoline and 2 stroke engine oil.
Note:
We can only provide CE certification, there is no other certification can be provided, thanks for your understanding!
Package includes
1 x Outboard Motor engine
Features:
• Features 360 degree steering rotation for reverse.
• Start-In-Gear protection/clutch feature prohibits prop rotation while idling
• Lift/Tilt feature for shallow water operation and convenience
• Standard CDI ignition system for easy starting and improved performance
• Vertical mount engine design for increased power, performance and durability
• Superior carbonation system with primer bulb for increased efficiency
• Twist grip throttle handle and engine stop button for improved response
• Superior outboard anti corrosion system and anodes for increased durability
• Durable cast aluminum construction for superior corrosion protection
• Heavy duty lightweight plastic cast propeller is standard equipment
Payment
Shipping
Returns
Contact Us
[ Policy: And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Shipping: This is the contents of your Shipping. You can add a banner for this Shipping as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Contact Us: This is the contents of your Contact Us. You can add a banner for this Contact Us as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
Engine type:    Single cylinder
Stroke:  2 stroke
Cooling System :  air-cooled
Engine model:    1E48F
Displacement :    63cc
Max. Power:    1.2.3kw/8000rpm
Start system:    Recoil start(manual start)
Ignition system:    CDI
Mixing ratio(Gasoline:oil)    25:1
Gasoline tank capacity:    1.2L
Idle speed:    3000rpm
Gear ratio:    2.08(27/13)
Propeller diameter:    18cm
Propeller options:    7-1/4*5-A inch
Running speed:    15--18km/h
Package includes
1 x Outboard Motor
Note:
Please use 93# gasoline and 2 stroke engine oil