2 Pc MUD-SKIPPER Longtail Mud Motor KIT up to 7hp Predator 212cc

Description

2 Pc MUD-SKIPPER Longtail Mud Motor KIT up to 7hp Predator 212cc
NEW FEATURES - BLACK POWDER COATED PTO HOUSING & BLACK POWDER COATED TILLER HANDLE - MUCH LESS CHROME!   Introducing the Mud-Skipper Easy V1 2-7HP Long Tail Motor Drive System The PATENTED EASY V1 Long tail shaft separates into two pieces making transport easier and makes shipping to you less expensive at the same time! The Kit Includes: 2 Piece - 85" Long Shaft and Nylon Greaseless Prop Bushing - with 4 Taiken Shaft bushings PTO Housing powder coated BLACK with Hardened "T" Style Wing Bolts The kit is designed for 5-7hp motors by using a 3/4" PTO shaft (see list of compatible motors below) PTO Inner Shaft with Grade 5 Steel Bolts AND Key for Engine Mounting Redesigned 4" Deep Transom Mount Clamp with hardened "T" Style Wing Bolts. Also, see our Transom Pad Kit! Engine Mount Base with Grade 5 Nuts & Bolts Adjustable Tiller Handle - Now Powder coated black! 2 Propellers -  6.25" & 6.5" Diameter. Now powder coated for efficiency and longer life Throttle Cable & Lever Push Button & Tethered Safety Kill Switch The EASY V1 kit is designed for sneak boats, canoes, layout boats, jon boats etc. Fits Engines with a 0.75" diameter PTO   Newly Designed Transom Mount - Reinforced "T" Style Wing Bolts & Grease Zerk Fitting. Transom Mount is 4" Deep (A Full Inch Deeper Than The Competition)   The Engine Mount The four bolt holes fit most engine bases up to 7hp Note the post on the engine base.  This fits into the tube on the transom mount, allowing the engine to swivel in all directions     The PTO Shaft Connector The PTO fits over the Engine Shaft and the Drive Shaft slots into it. Includes both screw and key mechanisms to lock into place. The Drive Housing The housing is bolted over the engine's drive shaft All engines have the four bolt hole configuration. This kit utilizes a 3-5/8" Bolt Circle (3.625") The kit fits the following 3/4" Horizontal, Keyed Shaft Motors: Harbor Freight 6.5hp - 212cc Predator  Honda 5.5hp & 6.5hp - GX160 & GX200 models Home Depot 6.5hp Lifan - 196cc Carroll Stream 5.5hp & 6.5hp Briggs 208cc 3/4" Horizontal shaft model Duromax 7hp Kohler 6.5hp Tecumseh 5.5hp OH195XA-71234 Many more.......   The Throttle Linkage Connections Mud-skipper Long Tail & Twister Spring Return Throttle Lever Hookup - YouTube Video will open in a new window [isdntekvideo]   Engine Requirements 3/4" Keyed, Horizontal Drive Shaft with 3-5/8" Bolt Circle  (Holes 2.48" x 2.48" in a square) Engine Mounting Bolt Holes  -  3.125" x 6.375" Engine Shaft 3/4" Diameter Straight Keyed Shaft   Kill Switch Installation Kill Switch Installation - YouTube Video will open in a new window [isdntekvideo] What our customers are saying: Clint  F -- "I want to say I'm glad I didn't believe the hype and go with the s*s company although I'm from Florida, now in Texas. I purchased your longtail 7 hp  kit and although I customized it it's awesome. No one has ever seen the like round here. I'm a commercial fisherman and I use this motor to collect and sell marsh baits. Thank you mudskipper for saving me $$$." Jeff C - "Just purchased your long tail mud motor and love it. I will be ordering the z bent steering arm for it soon. I  stand while operating the boat and it will make the motor complete. Thanks again guys good job"    Short montage of 6.5hp kit - YouTube Video will open in a new window [isdntekvideo]   5-7 hp Mud-Skipper Mud Motor - YouTube Video will open in a new window [isdntekvideo]   Enjoying my mudskipper longtail mud motor kit with a z bend handle - YouTube Video will open in a new window [isdntekvideo]   Mud Skipper 5-7hp Longtail kit with modified Predator 212cc... 17.5mph! - YouTube Video will open in a new window [isdntekvideo]   Mud Skipper River Run - YouTube Video will open in a new window [isdntekvideo]   Limited Two Year Warranty: If, within TWO years from the date of purchase your longtail mud-motor kit fails due to a defect in materials, or workmanship, we will repair or replace, at our discretion, any part that we determine to be defective in materials or workmanship, free of charge. If the product fails, the buyer must contact Mud-Skipper for an RMA prior to returning the product. Failed parts must be returned for inspection. Shipping expenses for any item submitted for repair or replacement under this warranty are the responsibility of the owner of the item. Mud-Skipper will provide return shipping of the repaired or replaced part to the customer via UPS, USPS parcel post, or other freight carrier of our choice (additional charges for expedited return shipping to the buyer is the responsibility of the buyer). This warranty does not cover damage due to impact, normal wear, excessive wear to the shaft or shaft bushings due to lack of lubrication, neglect, corrosion, lack of maintenance, modification to the product, or misuse. The customer will be responsible for the shipping costs of any item returned to them that is not covered under warranty. This warranty is provided to the original purchaser. Proof of original purchase is required on all warranties, exchanges, and returns. Electrical parts ARE covered under this warranty. Propellers ARE NOT covered under this warranty.
NEW FEATURES - BLACK POWDER COATED PTO HOUSING & BLACK POWDER COATED TILLER HANDLE - MUCH LESS CHROME!
Introducing the Mud-Skipper Easy V1 2-7HP Long Tail Motor Drive System
The PATENTED EASY V1 Long tail shaft separates into two pieces making transport easier and makes shipping to you less expensive at the same time!
The Kit Includes:
2 Piece - 85" Long Shaft and Nylon Greaseless Prop Bushing - with 4
Taiken Shaft bushings
PTO Housing powder coated BLACK with Hardened "T" Style Wing Bolts
The kit is designed for
5-7hp
motors by using a 3/4" PTO shaft (see list of compatible motors below)
PTO Inner Shaft with Grade 5 Steel Bolts AND Key for Engine Mounting
Redesigned 4" Deep Transom Mount Clamp with hardened "T" Style Wing Bolts. Also, see our
Transom Pad Kit
!
Engine Mount Base with Grade 5 Nuts & Bolts
Adjustable Tiller Handle - Now Powder coated black!
2 Propellers -  6.25" & 6.5" Diameter. Now powder coated for efficiency and longer life
Throttle Cable & Lever
Push Button & Tethered Safety Kill Switch
The EASY V1 kit is designed for sneak boats, canoes, layout boats, jon boats etc.
Fits Engines with a 0.75" diameter PTO
Newly Designed Transom Mount - Reinforced "T" Style Wing Bolts & Grease Zerk Fitting. Transom Mount is 4" Deep (A Full Inch Deeper Than The Competition)
The Engine Mount
The four bolt holes fit most engine bases up to 7hp
Note the post on the engine base.  This fits into the tube on the transom mount, allowing the engine to swivel in all directions
The PTO Shaft Connector
The PTO fits over the Engine Shaft and the Drive Shaft slots into it. Includes both screw and key mechanisms to lock into place.
The Drive Housing
The housing is bolted over the engine's drive shaft
All engines have the four bolt hole configuration. This kit utilizes a 3-5/8" Bolt Circle (3.625")
The kit fits the following 3/4" Horizontal, Keyed Shaft Motors:
Harbor Freight 6.5hp - 212cc Predator
Honda 5.5hp & 6.5hp - GX160 & GX200 models
Home Depot 6.5hp Lifan - 196cc
Carroll Stream 5.5hp & 6.5hp
Briggs 208cc 3/4" Horizontal shaft model
Duromax 7hp
Kohler 6.5hp
Tecumseh 5.5hp OH195XA-71234
Many more.......
The Throttle Linkage Connections
Mud-skipper Long Tail & Twister Spring Return Throttle Lever Hookup - YouTube
Video will open in a new window
[isdntekvideo]
Engine Requirements
3/4" Keyed, Horizontal Drive Shaft with 3-5/8" Bolt Circle  (Holes 2.48" x 2.48" in a square)
Engine Mounting Bolt Holes  -  3.125" x 6.375"
Engine Shaft 3/4" Diameter Straight Keyed Shaft
Kill Switch Installation
Kill Switch Installation - YouTube
Video will open in a new window
[isdntekvideo]
What our customers are saying:
Clint  F
-- "I want to say I'm glad I didn't believe the hype and go with the s*s company although I'm from Florida, now in Texas.
I purchased your longtail 7 hp  kit and although I customized it it's awesome.
No one has ever seen the like round here. I'm a commercial fisherman and I use this motor to collect and sell marsh baits.
Thank you mudskipper for saving me $$$."
Jeff C
- "Just purchased your long tail mud motor and love it. I will be ordering the z bent steering arm for it soon. I  stand while operating the boat and it will make the motor complete. Thanks again guys good job"
Short montage of 6.5hp kit - YouTube
Video will open in a new window
[isdntekvideo]
5-7 hp Mud-Skipper Mud Motor - YouTube
Video will open in a new window
[isdntekvideo]
Enjoying my mudskipper longtail mud motor kit with a z bend handle - YouTube
Video will open in a new window
[isdntekvideo]
Mud Skipper 5-7hp Longtail kit with modified Predator 212cc... 17.5mph! - YouTube
Video will open in a new window
[isdntekvideo]
Mud Skipper River Run - YouTube
Video will open in a new window
[isdntekvideo]
Limited Two Year Warranty:
If, within TWO years from the date of purchase your longtail mud-motor kit fails due to a defect in materials, or workmanship, we will repair or replace, at our discretion, any part that we determine to be defective in materials or workmanship, free of charge. If the product fails, the buyer must contact Mud-Skipper for an RMA prior to returning the product. Failed parts must be returned for inspection. Shipping expenses for any item submitted for repair or replacement under this warranty are the responsibility of the owner of the item. Mud-Skipper will provide return shipping of the repaired or replaced part to the customer via UPS, USPS parcel post, or other freight carrier of our choice (additional charges for expedited return shipping to the buyer is the responsibility of the buyer). This warranty does not cover damage due to impact, normal wear, excessive wear to the shaft or shaft bushings due to lack of lubrication, neglect, corrosion, lack of maintenance, modification to the product, or misuse. The customer will be responsible for the shipping costs of any item returned to them that is not covered under warranty. This warranty is provided to the original purchaser. Proof of original purchase is required on all warranties, exchanges, and returns. Electrical parts ARE covered under this warranty. Propellers ARE NOT covered under this warranty.
eBay integration
by